Camshaft
- Provides More Lift And Duration
- Intake Cam Lift Increased from 7.9mm to 9.0mm
- Duration Increased 16 Degrees to 240 Degrees
- Cams Will Work With Stock Pistons
- No Valve Spring Change Is Required
- Incl. 4 VCT Filter Screens
- 14mm Lift / 270 Degree Duration; Intake/Exhaust
- Must Use w/5.0L Gen 2 Cam Phasers/Chains/Crank Sprocket
- To Be Used w/Standard 5.0L Coyote Firing Order
- Custom Calibration Required
- Requires Upgraded Valve Springs
- Valve Spring Requires 120 lbs V. Seat Press. Min. 295 lbs Open
- On EFI Perf Camshafts Work Only w/Mass Air Induction Syst.
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take the Guesswork Out of Camshaft Selection!